Create a Real-time Protection Policy for Isolation (Targeted RBI)

Create a Real-time Protection Policy for Isolation (Targeted RBI)

Policies are defined using a set of variables. These variables define the criteria for detecting policy violations.

For descriptions for each of the variables used, refer to Real-time Protection Policy Variables.

Note

When you see a text box during the policy workflow, click in the text box to view your additional options or to edit your selection(s). These options dynamically display based on your initial template choice. Many criteria are set to ‘Any’ by default. This means the policy engine will not match against the criteria.

When available, click Add Criteria to see what other match criteria are supported. Add more criteria to your policy to make it more specific.

Optionally, click the ‘X’ to the far right of the text box to remove criteria.

To create a Targeted RBI Policy you need to take into account the following constraints and configurations for web pages to be isolated properly.

  1. On the Real-time Protection Policies page, click New Policy > RBI. Your menu options may differ based on the licenses available for your account.
    rbi_new_policy.jpg

    When you select RBI, the system automatically picks ‘web access’ and populates recommended fields, such as Category with the recommended RBI categories.

  2. Select the Source. Click in the text box to select users. Traffic Criteria is sorted as ‘Source’ and ‘Destination.’ The system will show the most appropriate criteria based on your policy template selection. Many criteria are set to ‘Any’ by default. This means the policy engine will not match against the criteria.

    In addition, RBI policy creation / edition will enforce indicating the user’s browser as part of the RBI policy source criteria, to increase Customer’s RBI Policy efficacy and severely reduce non isolable requests sent to RBI. You must select mandatory browser fields in isolate type policies for example, RBI, Web Access, and Cloud App Access. If the Action is isolate, then the browsers field loads with supported browser names. This field cannot be left blank while saving the RTP policy. NOTE: This feature is currently in Beta. Contact your Sales Representative or Support to enable this feature.

  3. Optionally, click Add Criteria to see what other match criteria are supported. Add more criteria to your policy to make it more specific.
    AddCriteriaHTTPHeader.png
  4. For Destination, Category is automatically selected and it’s the only criteria that can be used for targeted RBI. You can choose to isolate any web page which falls in the following category list:

    Newly Registered Domain

    Newly Observed Domain

    No Content

    Parked Domains

    Uncategorized

    Web Proxies/Anonymizers.

    RBI_RTP_Policy_Categories.jpg

    These categories are described in the RBI Category Definitions.

    Tip

    The system will notify you if you have added unrecommended categories to an isolation policy. Remove the unrecommended categories to avoid website performance degradation.

  5. You can add more Destination criteria. The system will show the most appropriate criteria based on Application, Category, App Instance, or Private App selection. Leave this blank for RBI policies.
  6. Select a Profile and Action. For RBI policies, select the “Isolate” action.
  7. You can specify an RBI template. The default RBI template is applied but you can select a different template from the dropdown list.

    Optionally, you can create a new template when the action is set to “Isolate” and attach it directly to the new Real-time Protection policy. Once created, it will be available in the list of RBI templates and admins can attach it to the RBI policy. To learn more: RBI Templates

    rbi_rtp_create_template.png
  8. Do not add a DLP profile. They do not apply for targeted RBI.
  9. Enter a name and a description.

    Important

    When creating policy names, only use alphanumeric characters and symbols such as “_” underscore, “-” dash, and “[ or ]” square brackets. You cannot use the greater than “>” and less than “<” symbols in policy names. 

  10. Select an Email Notification. Select the notification frequency. Choose None if you don’t want an email notification about the policy violation and the resulting action. When you choose ‘Every,’ you can select the frequency of the email notifications from the dropdown list – 30 Mins, 60 Mins, 6 Hours, 24 Hours. Or, choose to notify ‘After each event.’

    Select the User, Admin, or Users to be notified. You can use the default email template or create a new template. Optionally, you can specify an email address that will appear as the sender in the email notification. When finished, click Done to save your email notification setting and exit the window.

    CloudAppPolicyEmails.png
  11. Click Save in the upper right corner to save your new policy. You should see it in the Policy list page.

    Tip

    Navigate to Policies > Real-time Protection > RBI__add_filter.jpg > RBI Template to filter policies that are using a specific RBI template. Optionally, you can select Action > Isolate to view policies that are using the RBI Isolate action. To learn more: Isolation Events in Skope IT

  12. Optionally, you can view pending changes for your RBI templates. Details such as field and controls that were edited, enabled, disabled, or cloned are described. Click Policies > Templates > RBI > pending_changes.jpg
    pending_changes_rbi.jpg

RBI Policy Variables

The following variables can be defined for an RBI Real-time Protection policy. You can use a variety of variables in a policy. If a variable is not used in the policy, it is defined as Any.

VariableDescription
UsersUsers created manually in the UI or Active directory users that are automatically populated from the enterprise AD server.
User GroupsThese are the Active Directory (AD) groups that are automatically populated to the Netskope cloud from the Enterprise AD server. Specifying user groups in a policy requires installing the Netskope AD adapter on a server that is part of your domain in order to export the AD user group names.
Organizational UnitThis information is obtained from the exported AD groups. Specifying organizational units in a policy requires installing the Netskope AD adapter on a server that is part of your domain in order to export the AD organizational unit names.
Cloud Apps + WebCloud app variables include:
Additional AttributesThese optional variables detect the following:
  • Access Method: The access type, like client, mobile, GRE, IPSec, and so on.
  • Browser: The browser type, like Chrome, Internet Explorer, and so on.
  • Device Classification: Managed or unmanaged devices based on the classifications created in Settings > Manage > Device Classification. This option is only applicable for access methods: Client, Mobile Profile, Revere Proxy.
  • Source Countries: The countries from which queries originate.
  • OS: Operating system types, like Mac, Linux, Windows, Android, iOS, and so on.
  • Source Network: The network address, range, or any network, including user IP address or egress IP address.
  • User Type: The user, to a user, or from a user.
ActionAction taken when a violation is detected:
  • Isolate: Forwards the request to the Netskope Remote Browser Isolation service for web isolation. Web browsing activity corresponding to the request is executed and rendered into a pixel stream in a remote browsing session in one isolated, ephemeral environment (a container) assigned for the individual user.

    Tip

    The user will exit isolation if they browse to a different domain. All browsing data is deleted after the isolation session ends. Netskope does not store any browsing data.

  • RBI template: They are attached to the RBI policy to apply granular controls to govern the user interaction in isolated web sites matching the policy. Netskope provides a predefined template for every tenant. To learn more: RBI Templates. Optionally, users can create a new template from the Real-time Protection policy workflow by clicking create_template.jpg.
Share this Doc

Create a Real-time Protection Policy for Isolation (Targeted RBI)

Or copy link

In this topic ...