Deploy Device Intelligence Virtual Appliance on VMware ESXi

Deploy Device Intelligence Virtual Appliance on VMware ESXi

Prerequisites and Limitations

  • You have a licensed copy of the Device Intelligence product with the serial number required for activation. Please reach out to the Netskope support team to buy the product.
  • You have Device Intelligence template files downloaded locally. Please reach out to Netskope support or Technical Account Manager to get Device Intelligence template files.
  • Minimum two network interfaces (vNICs) are set up. One is a dedicated vNIC for the management interface and one is for the SPAN interface. An additional vNIC for SPAN traffic can be added if needed.
  • Virtual standard switch or virtual distributed switch is set up with “promiscuous” mode to receive span traffic.
  • Device Intelligence virtual appliance supports ESXi systems with vSphere 6.5, 7.0 or higher.
  • The host must be a x86-based Intel or AMD CPU with virtualization extension.
  • Device Intelligence OVA/OVF supports VMware virtual machine hardware version vmx-14.

Create Device Intelligence Appliance

  1. Log in to your VMware ESXi server.
  2. Click the Create/Register VM button. New Virtual Machine dialog box appears.
  3. On step 1, select the Deploy a virtual machine from an OVF or OVA file option to create a virtual machine, and click Next.
    2__Esxi1.png
  4. On step 2, give a name to the Device Intelligence virtual appliance. Select four locally downloaded Device Intelligence VM template files. Use multiple selection to select all the OVF template (.ovf, .vmdk, .mf, and .nvram) files and click Next.
    2__Esxi2.png
  5. On step 3, select the storage type and datastore for the virtual machine’s configuration files and all of its virtual disks. Click Next.
    2__ESXi3_replacement.png
  6. On step 4, select the 2 configured vNICs to the network sources and disk provisioning options. Uncheck the Power on automatically option and click Next.
    2__ESXi4_replacement.png
  7. On step 5, change the guestinfo.serial value to the serial number provided by the support team when you bought the product and click Next.
    2__Esxi5.png
  8. On step 6, review the configuration and Click Finish to start VM creation. Wait for the virtual machine to be ready for use.

Note

It takes almost 1 hour to get the virtual machine ready. You can check the  status of the VM creation on the status bar.

Activate Device Intelligence Appliance

  1. Select the datastore on which the VM was created from the left side pane Storage menu.
  2. Click on the Datastore Browser.
  3. Select the virtual machine you created and select the .vmx file from the right pane. Download the .vmx file locally.
    2__ESXi6.png
  4. Open the .vmx file in an editor.
  5. Add the following text at the end of the file and replace SNWOOTAPPDEPLOY01 with the serial number provided by the Netskope support team.

    guestinfo.ovfEnv = "key=guestinfo.serial value=SNWOOTAPPDEPLOY01"

    2__ESXi7.png
  6. Save the file.
  7. Go back to the Datastore Browser. Select the virtual machine and select the .vmx file from the right pane. 
  8. Click Upload from the actions and select the modified .vmx file in step 5. Click Open.
    2__ESXi8.png
  9. Close the Datastore Browser.
  10. Select the virtual machine from the left pane and power on the VM.
    2__ESXi9.png
  11. Log in to the Device Intelligence appliance from the browser using https://app.iotsec.goskope.com/login link with Netskope registered email and password.

Note

If you do not have the credentials, contact the Netskope product vendor, marketing team, or support team.

References

Share this Doc

Deploy Device Intelligence Virtual Appliance on VMware ESXi

Or copy link

In this topic ...