Install Software using SCP Pull Commands
Install Software using SCP Pull Commands
To use this procedure, you must first download the software package to a local SCP server. Please contact (Netskope Support) to obtain the latest software upgrade package.
If you have a software version older that 38.10, upgrade to this version before upgrading to 42.14.
Tip
To upgrade a software component instead of the complete software package, replace software
with appinfo
, appmeta
, or content
in the commands.
To install a software upgrade with SCP pull:
- Enter this command from the appliance UI:
mp01>scp import upgrade-package from host <SCP-remote-host-IP> user<SCP-remote-username>path</path/filename.pkg>
- After the download is complete, enter this command to prepare the software package:
upgrade software prepare version <version number>
To check the status of the prepare process, enter this command:
prepare software status
Status: SUCCESS
will display when the prepare process is complete. - Enter this command to install the new software package:
upgrade software install
To check the status of the install process, enter this command:
install software status
Status: SUCCESS
will display when the install process is complete. - Enter this command to verify the version of the software package installed:
show version-info
- After the install process is complete, enter this command to reset the provisioner:
restart provisioner