Overview for On-Premises Appliance Version 113.0.0

Overview for On-Premises Appliance Version 113.0.0

The N2000 and N5000 appliances provide the physical footprint to process and maintain data inside an enterprise’s perimeter.


The N1000, N5000, and N10000 appliances are no longer available for purchase. Netskope continues to support software upgrades on existing N1000, N5000, and N10000 appliances.

The N2000 appliance hardware has been revised and comes preloaded with Appliance software version 113.0.0.

The following are the specifications of the new appliance hardware.

eth4Out (Outbound)10g
eth5In (Inbound)10g

The following are the specifications of the old appliance hardware.

N2000N5000 Series II
CPUDual 16 core Dual 10 core
Memory512 GB DDR4768 GB DDR4
Storage4x 1.2 TB Intel SSD12x 1.2 TB SSD
I/O(2x 10gbe), 1x gbe ipmi, 1x gbe mgmt, 3x gbe(2x 10gbe) 1x gbe ipmi, 1x gbe mgmt, 3x gbe
PowerDual redundant 800WDual redundant 750W


To move to version 113.0.0, you must be running a minimum version since Netskope supports upgrades up to two versions prior to the current version.

To learn more about the appliance: Overview of Netskope On-Premises Appliance.

Appliance Software Version Support

Netskope Appliance software releases are available every 4-months and will have Netskope support up to two previous versions. Direct software upgrades are supported as long as the “from” and “to” software releases are within two versions apart.

Netskope appliance releases are numbered in the form of X.X.X where the Xs represent the major, minor, and build release numbers, respectively. For example, appliance release and older releases are deprecated when appliance release 113.0.0 goes live. Release numbers are not sequential like 101, 102, and 103. Instead, release numbers jump numerically, like, 110.0.0, and 113.0.0, to reflect parity with the Netskope Cloud Releases.

The following table provides the upgrade path to the latest software version.

Current versionUpgrade to version
Any version before

Releases that are outside the Netskope support period:

  • Are not guaranteed to work with the latest cloud releases.
  • Are no longer tested by Netskope.
  • Do not receive hotfixes.
  • Do not receive new feature updates.

At our discretion, we may provide support for releases outside our support period. If a customer encounters an error in a version of software that is other than the latest release, Netskope may require the customer to upgrade to a specified later version to obtain a correction of the error.

For information about end-of-life and end-of-support for appliance releases, refer to EOL/EOS for DPoP r99.

Share this Doc

Overview for On-Premises Appliance Version 113.0.0

Or copy link

In this topic ...