Requirements for Virtual Appliance Version 110.0.0

Upgrading to version 110.0.0

Before downloading the upgrade package, ensure the following:

Rollback from 110.0.0 is not supported.
You are running a minimum version of 103.0.0.338. If you are running appliance versions older than 103.0.0.338, or if the root (/) partition is less than 64 GB, you must deploy a new Virtual Appliance and import configurations from the old appliance. To learn more: Install a Virtual Appliance.
Note
If your Virtual Appliance uses a 64 GB root (/) partition, then you must ensure that at least 8 GB of free space is available before upgrading.
There is at least 25 GB of free space on the /opt/ns/upgrades partition where the upgrade package is downloaded. You can delete older versions of the appliance from the upgrades folder to free up disk space.
To learn more: Upgrade the Virtual Appliance.
All the dhcp interfaces on the appliance are configured with a static IP, netmask and gateway.
Export the current appliance configurations to a different host. To learn more: Exporting Configurations.

To verify that the host is reachable, run the following telnet command.

nsappliance> telnet host cz.archive.ubuntu.com port 80
Executing telnet as: ['telnet', 'cz.archive.ubuntu.com', '80']
Trying 217.31.202.63...
Connected to mirror-r-01.nic.cz.
Escape character is '^]'.

The following are the minimum hardware requirements to install and run the Virtual Appliance.

Component	Requirements
Physical RAM	32 GB
Processor	8-Core
Hard disk space	400 GB is the total disk space required across all partitions. This includes 96 GB for storing and processing logs and 304 GB for the root partitions which store the Netskope software, configuration files, and data files. You must increase the disk capacity depending on the size of the logs that are processed daily. For information on increasing the partition size, see “Increase the Size of the Partition” under Optional Configurations topic on the Knowledge Portal. Note Netskope recommends that you increase the disk capacity by 5 times the expected daily log collection size.

Component

Requirements

Physical RAM

32 GB

Processor

8-Core

Hard disk space

400 GB is the total disk space required across all partitions. This includes 96 GB for storing and processing logs and 304 GB for the root partitions which store the Netskope software, configuration files, and data files.

You must increase the disk capacity depending on the size of the logs that are processed daily.

For information on increasing the partition size, see “Increase the Size of the Partition” under Optional Configurations topic on the Knowledge Portal.

Note

Netskope recommends that you increase the disk capacity by 5 times the expected daily log collection size.

Appliance Software Version Support

Netskope Appliance software releases are available every 4-months and will have Netskope support up to two previous versions. Direct software upgrades are supported as long as the “from” and “to” software releases are within two versions apart.

Netskope appliance releases are numbered in the form of X.X.X where the Xs represent the major, minor, and build release numbers, respectively. For example, appliance release 99.0.0 and older releases are deprecated when appliance release 110.0.0 goes live. Release numbers are not sequential like 101, 102, and 103. Instead, release numbers jump numerically, like 103.0.0.338, 106.0.0.379, and 110.0.0, to reflect parity with the Netskope Cloud Releases.

The following table provides the upgrade path to the latest software version.

Current version	Upgrade to version
Any version before 103.0.0.338	103.0.0.338
103.0.0.338	110.0.0
106.0.0.379	110.0.0

Releases that are outside the Netskope support period:

Are not guaranteed to work with the latest cloud releases.
Are no longer tested by Netskope.
Do not receive hotfixes.
Do not receive new feature updates.

At our discretion, we may provide support for releases outside our support period. If a customer encounters an error in a version of software that is other than the latest release, Netskope may require the customer to upgrade to a specified later version to obtain a correction of the error.

For information about end-of-life and end-of-support for appliance releases, refer to EOL/EOS for DPoP r99.

Hash values for Virtual Appliance Installation Files

The following table provides the md5sum and sha256sum values for the Virtual Appliance installer files on VMware ESX, Microsoft Hyper-V, and Linux KVM platforms for version 110.0.0.

File Type	md5sum	sha256sum
ESX OVA	f72f42e5ec27e95700b8d0f56216dd37	fb8203a022bdbb9d5a6f5783d6a9e641f1aae22f15dd5a864486d96b780401a5
Hyper-V Image	69c60d61b8c96bb7c995e2d30fde4380	09e096156820ee2172042eeee9858d93ae4a002a2223cd982f2044b76f1746b7
KVM Image	fe79b732b2e457e4af2809e7317d663b	b52ede42c6e3e0fe6ced283a0fa53b4dcd9342f30f69797becb26fe7c16e341b

Requirements for Virtual Appliance Version 110.0.0